View HD74LV4053A_5644416.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74LV4053A triple 2-channel analog multiplexer / demultiplexer ade-205-284 (z) 1st edition april 1999 description the HD74LV4053A handles both analog and digital signals, and enables signals of either type with amplitudes of up to 5.5 v (peak) to be transmitted in either direction (at v cc = 0 v to 5.5 v). applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. features v cc = 2.0 v to 5.5 v operation all inputs v ih (max.) = 5.5 v (@v cc = 0 v to 5.5 v) function table inputs inh c b a on channel l l l l 1y0, 2y0, 3y0 l l l h 1y1, 2y0, 3y0 l l h l 1y0, 2y1, 3y0 l l h h 1y1, 2y1, 3y0 l h l l 1y0, 2y0, 3y1 l h l h 1y1, 2y0, 3y1 l h h l 1y0, 2y1, 3y1 l h h h 1y1, 2y1, 3y1 h x x x none note: h: high level l: low level x: immaterial
HD74LV4053A 2 pin arrangement v cc 2?om 1?om 1y1 b 1y0 a 2y1 2y0 3y1 3?om 3y0 inh gnd gnd c (top view) 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10
HD74LV4053A 3 absolute maximum ratings item symbol ratings unit conditions supply voltage range v cc ?.5 to 7.0 v input voltage range* 1 v i ?.5 to 7.0 v output voltage range* 1, 2 v o ?.5 to v cc + 0.5 v output: h or l input clamp current i ik ?0 ma v i < 0 output clamp current i ok 50 ma v o < 0 or v o > v cc continuous output current i o 25 ma v o = 0 to v cc continuous current through v cc or gnd i cc or i gnd 50 ma maximum power dissipation at ta = 25 c (in still air)* 3 p t 785 mw sop 500 tssop storage temperature tstg ?5 to 150 c notes: the absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 1. the input and output voltage ratings may be exceeded even if the input and output clamp-current ratings are observed. 2. this value is limited to 5.5 v maximum. 3. the maximum package power dissipation was calculated using a junction temperature of 150 c. recommended operating conditions item symbol min max unit conditions supply voltage range v cc 2.0* 1 5.5 v input voltage range v i 0 5.5 v output voltage range v i/o 0v cc v input transition rise or fall rate d t / d v 0 200 ns/v v cc = 2.3 to 2.7 v 0 100 v cc = 3.0 to 3.6 v 020 v cc = 4.5 to 5.5 v operating free-air temperature ta ?0 85 c notes: unused or floating inputs must be held high or low. 1. with the supply voltage at or around 2 v, the analog switch on-state resistance loses linearity significantly. it is recommended that only digital signals be transmitted at these low supply voltages.
HD74LV4053A 4 logic diagram a 1?om 3?om 2?om b c inh 1y0 1y1 2y0 2y1 3y0 3y1
HD74LV4053A 5 dc electrical characteristics ta = 25 c ta = ?0 to 85 c item symbol v cc (v) min typ max min m ax unit test conditions input voltage v ih 2.0 1.5 v 2.3 to 2.7 v cc 0.7 3.0 to 3.6 v cc 0.7 4.5 to 5.5 v cc 0.7 v il 2.0 0.5 2.3 to 2.7 v cc 0.3 3.0 to 3.6 v cc 0.3 4.5 to 5.5 v cc 0.3 on-state switch resistance r on 2.3 60 180 225 w v in = v cc or gnd v inh = v il i t = 2 ma 3.0 50 150 190 4.5 40 75 100 peak on resistance r on (p) 2.3 200 500 600 w v in = v cc to gnd v inh = v il i t = 2 ma 3.0 90 180 225 4.5 50 100 125 difference of on-state resistance between switches d r on 2.3 20 30 40 w v in = v cc to gnd v inh = v il i t = 2 ma 3.0 10 20 30 4.5 7 15 20 off-state switch leakage current is (off) 5.5 0.1 1.0 m av in = v cc , v ou t = gnd or v in = gnd, v o = v cc , v inh = v ih on-state switch leakage current is (on) 5.5 0.1 1.0 m av in = v cc or gnd v inh = v il input current i in 0 to 5.5 0.1 1.0 m av in = 5.5 v or gnd quiescent supply current i cc 5.5 20 m av in = v cc or gnd note: for conditions shown as min or max use the appropriate values under recommended operating conditions.
HD74LV4053A 6 switching characteristics v cc = 2.5 0.2 v ta = 25 c ta = ?0 to 85 c item symbol min typ max min max unit test conditions from (input) to (output) propagation delay time t plh t phl 2.5 10.0 16.0 ns c l = 15 pf com or yn yn or com 5.0 12.0 18.0 c l = 50 pf enable time t zh t zl 7.0 18.0 23.0 ns r l = 1 k w c l = 15 pf inh com or yn 9.0 28.0 35.0 c l = 50 pf disable time t hz t lz 9.0 18.0 23.0 ns r l = 1 k w c l = 15 pf inh com or yn 13.0 28.0 35.0 c l = 50 pf v cc = 3.3 0.3 v ta = 25 c ta = ?0 to 85 c item symbol min typ max min max unit test conditions from (input) to (output) propagation delay time t plh t phl 2.0 6.0 10.0 ns c l = 15 pf com or yn yn or com 4.0 9.0 12.0 c l = 50 pf enable time t zh t zl 5.0 12.0 15.0 ns r l = 1 k w c l = 15 pf inh com or yn 7.0 20.0 25.0 c l = 50 pf disable time t hz t lz 7.0 12.0 15.0 ns r l = 1 k w c l = 15 pf inh com or yn 10.0 20.0 25.0 c l = 50 pf
HD74LV4053A 7 switching characteristics (cont) v cc = 5.0 0.5 v ta = 25 c ta = ?0 to 85 c item symbol min typ max min max unit test conditions from (input) to (output) propagation delay time t plh t phl 1.5 4.0 7.0 ns c l = 15 pf com or yn yn or com 3.0 6.0 8.0 c l = 50 pf enable time t zh t zl 4.0 8.0 10.0 ns r l = 1 k w c l = 15 pf inh com or yn 5.0 14.0 18.0 c l = 50 pf disable time t hz t lz 5.0 8.0 10.0 ns r l = 1 k w c l = 15 pf inh com or yn 8.0 14.0 18.0 c l = 50 pf
HD74LV4053A 8 switching characteristics (cont) ta = 25 c item symbol v cc (v) min typ max unit test conditions from (input) to (output) control input capacitance c ic 4.5 pf common terminal capacitance c is 12.5 pf switch terminal capacitance c i/o 7.0 pf feedthrough capacitance c t 0.5 pf power dissipation capacitance c pd 9.0 pf frequency response (switch on) 2.3 30.0 mhz c l = 50 pf, r l = 600 w adjust f in voltage to obtain 0 dbm at output when f in is 1 mhz (sine wave). increase f in frequency until the db- meter reads ? dbm. 20 log (v o /v i ) = ? db m com or yn yn or com 3.0 35.0 4.5 50.0 crosstalk (between any switches) 2.3 ?5.0 db c l = 50 pf, r l = 600 w adijust f in voltage to obtain 0 dbm at input when f in is 1 mhz (sine wave). com yn 3.0 ?5.0 4.5 ?5.0 crosstalk (control input to signal output) 2.3 20.0 mv c l = 50 pf, r l = 600 w adjust r l value to obtain 0 a at i in /ou t when f in is 1 mhz (squave wave). inh com or yn 3.0 35.0 4.5 65.0
HD74LV4053A 9 switching characteristics (cont) ta = 25 c item symbol v cc (v) min typ max unit test conditions from (input) to (output) feedthrough attenuation (switch off) 2.3 ?5 db c l = 50 pf, r l = 600 w adjust f in voltage to obtain 0 dbm at input when f in is 1 mhz (sine wave). com or yn yn or com 3.0 ?5 4.5 ?5 sine-wave distortion 2.3 0.1 % c l = 50 pf, r l = 10 k w f in = 1 khz (sine wave) v i = 2 v p-p , v cc = 2.3 v v i = 2.5 v p-p , v cc = 3.0 v v i = 4 v p-p , v cc = 4.5 v com or yn yn or com 3.0 0.1 4.5 0.1
HD74LV4053A 10 test circuits r : on-state switch resistance on is (off): off-state switch leakage current, is (on): on-state switch leakage current v cc v out r = ( ) 2 10 ? on v = v or gnd in cc v ? in out v ? in out v = v inh il v cc gnd 2.0 ma v (on) v cc v = v inh ih v = v inh il v cc gnd (off) a ab ab v cc open v cc gnd (on) a
HD74LV4053A 11 t , t : propagation delay time (from switch input to switch output) plh phl v cc b a v inh v out v = v inh il v cc gnd (on) c = 15 or 50 pf l r = 50 l switching time t zl 0 v v cc v ol v cc v cc 50% v cc 50% v cc 50% v cc 50% v cc 50% v cc 50% t /t gnd gnd lz zl t /t hz zh test s1 s2 v cc v cc v cc v inh v in v out s1 v cc gnd c = 15 or 50 pf l r = 1 k l s2 v inh v out t zh 0 v v cc v oh 0 v v inh v out t lz 0 v v cc v ol v +0.3 v ol v cc v inh v out t hz 0 v v cc v oh v ?.3 v oh 0 v r = 50 l
HD74LV4053A 12 frequency response (switch on) v cc v = v 0.1 f inh v in v out il v cc f in f = sine wave in gnd (on) c = 50 pf l r = 600 l r = 50 l v /2 cc crosstalk (between any switches) v /2 cc r = 600 l v cc 0.1 f v in v out1 v /2 cc v =v or gnd ccc v =v or gnd c v = gnd inh cc v cc f in gnd v = gnd inh (on) c = 50 pf l r = 600 l r = 600 l r = 50 l v cc v out2 v /2 cc v cc gnd (off) c = 50 pf l r = 600 l
HD74LV4053A 13 feedthrough attenuation (switch off) v cc v = v 0.1 f inh v in v out v /2 cc ih v cc f in gnd (off) c = 50 pf l r = 600 l r = 600 l v /2 cc r = 600 l r = 50 l crosstalk (control input to signal output) v out v /2 cc c = 50 pf l r = 600 l v /2 cc r = 600 l v cc v inh v cc gnd r = 50 l sine-wave distortion v cc v = v 10 f inh v in v out v /2 cc il v cc f in gnd (on) c = 50 pf l r = 10 k l
HD74LV4053A 14 package dimensions hitachi code jedec eiaj weight (reference value) fp-16da conforms 0.24 g unit: mm *dimension including the plating thickness base material dimension *0.22 0.05 *0.42 0.08 0.12 0.15 m 2.20 max 5.5 10.06 0.80 max 16 9 1 8 10.5 max + 0.20 ?0.30 7.80 0.70 0.20 0 ?8 0.10 0.10 1.15 1.27 0.40 0.06 0.20 0.04
HD74LV4053A 15 hitachi code jedec eiaj weight (reference value) fp-16dn conforms conforms 0.15 g unit: mm *dimension including the plating thickness base material dimension 1.27 16 9 1 8 0.15 0.25 m 1.75 max 3.95 *0.22 0.03 9.9 0 ?8 10.3 max + 0.10 ?0.30 6.10 + 0.67 ?0.20 0.60 + 0.11 ?0.04 0.14 *0.42 0.08 0.635 max 0.40 0.06 0.20 0.03 1.08
HD74LV4053A 16 hitachi code jedec eiaj weight (reference value) ttp-16da 0.05 g unit: mm *dimension including the plating thickness base material dimension 0.50 0.10 0 ?8 *0.17 0.05 6.40 0.20 0.10 1.10 max 0.13 m 0.65 18 16 9 4.40 5.0 5.3 max 0.07 +0.03 ?.04 0.65 max 1.0 0.20 0.06 + 0.08 ?0.07 *0.22 0.15 0.04
HD74LV4053A 17 cautions 1. hitachi neither warrants nor grants licenses of any rights of hitachi? or any third party? patent, copyright, trademark, or other intellectual property rights for information contained in this document. hitachi bears no responsibility for problems that may arise with third party? rights, including intellectual property rights, in connection with use of the information contained in this document. 2. products and product specifications may be subject to change without notice. confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. hitachi makes every attempt to ensure that its products are of high quality and reliability. however, contact hitachi? sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as in aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. design your application so that the product is used within the ranges guaranteed by hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safe devices, so that the equipment incorporating the hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the hitachi product. 5. this product is not designed to be radiation resistant. 6. no one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from hitachi. 7. contact hitachi? sales office for any questions regarding this document or hitachi semiconductor products. hitachi, ltd. semiconductor & integrated circuits. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan tel: tokyo (03) 3270-2111 fax: (03) 3270-5109 copyright ?hitachi, ltd., 1998. all rights reserved. printed in japan. hitachi asia pte. ltd. 16 collyer quay #20-00 hitachi tower singapore 049318 tel: 535-2100 fax: 535-1533 url northamerica : http:semiconductor.hitachi.com/ europe : http://www.hitachi-eu.com/hel/ecg asia (singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm asia (taiwan) : http://www.hitachi.com.tw/e/product/sicd_frame.htm asia (hongkong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm japan : http://www.hitachi.co.jp/sicd/indx.htm hitachi asia ltd. taipei branch office 3f, hung kuo building. no.167, tun-hwa north road, taipei (105) tel: <886> (2) 2718-3666 fax: <886> (2) 2718-8180 hitachi asia (hong kong) ltd. group iii (electronic components) 7/f., north tower, world finance centre, harbour city, canton road, tsim sha tsui, kowloon, hong kong tel: <852> (2) 735 9218 fax: <852> (2) 730 0281 telex: 40815 hitec hx hitachi europe ltd. electronic components group. whitebrook park lower cookham road maidenhead berkshire sl6 8ya, united kingdom tel: <44> (1628) 585000 fax: <44> (1628) 778322 hitachi europe gmbh electronic components group dornacher stra? 3 d-85622 feldkirchen, munich germany tel: <49> (89) 9 9180-0 fax: <49> (89) 9 29 30 00 hitachi semiconductor (america) inc. 179 east tasman drive, san jose,ca 95134 tel: <1> (408) 433-1990 fax: <1>(408) 433-0223 for further information write to:

▲Up To Search▲

Price & Availability of HD74LV4053A

	To Download HD74LV4053A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .